Habe heute mal mit einem Kollegen in der Firma gesprochen. Ein Freund von ihm hatte mal 5 verschimmelte Bänder abgespielt. Danach war sein Videorekorder Schrott, auch reinigen half nicht mehr.
Schimmel sollte man nicht unterschätzen! Wenn ich Glück habe, hat ein Freund von mir auch die Filme, die ich noch haben will. Muß ihn mal fragen...
Perry
Schimmel sollte man nicht unterschätzen! Wenn ich Glück habe, hat ein Freund von mir auch die Filme, die ich noch haben will. Muß ihn mal fragen...
Perry
Blu-ray Steeljunkie
Mod
Mod
Registriert seit: 12.06.05
Style: Roter Spinat
Alter: 52
Geschlecht:
♂
Beiträge: 2.136
IRC Zeilen: 22121
☆
☆
☆
☆
☆
★
Bei wieviel Grad denn, 250°C ?
B.O.F.H.
Wollt ich auch grad fragen, bei wärme geht doch das feine Band kaputt.
Hab mal nachgerechnet. Die reden von 135° bis 165° Fahrenheit, das sind ca. 55° bis 70° C. Man kann im Hochsommer die Kassetten ja auch im Auto in der Sonne lassen, da kommen ähnliche Temperaturen zustande.
Allerdings acht Stunden? Verdammt lange. Und dann muß man die Bänder noch mühselig von Hand (oder besser mit der Bohrmaschine) einmal durchlaufen lassen und mit einem weichem Tuch reinigen. Ob sich dieser Aufwand bei meinen Bändern lohnt, wage ich mal zu bezweifeln.
Auf jeden Fall sollte man Magnetbänder niemals in Garagen lagern!
Perry
Allerdings acht Stunden? Verdammt lange. Und dann muß man die Bänder noch mühselig von Hand (oder besser mit der Bohrmaschine) einmal durchlaufen lassen und mit einem weichem Tuch reinigen. Ob sich dieser Aufwand bei meinen Bändern lohnt, wage ich mal zu bezweifeln.
Auf jeden Fall sollte man Magnetbänder niemals in Garagen lagern!
Perry
Registered Users
Hab auch noch son paar VHS Kasetten im (feuchten) Keller liegen, die sind warscheinlich auch hinüber....
B.O.F.H.
shred -n15 -x *.vhs
Wenn man private Aufnahmen hat auf VHS (Hochzeit, Feiern, Private Prons ) dann
isses sicherlich ärgerlich wenn die Kassetten kaputt sind.
Bei Filmen siehts mittlerweile ja so aus , das auch Klassiker auf DVD rauskommen.
Ghostbusters usw.
isses sicherlich ärgerlich wenn die Kassetten kaputt sind.
Bei Filmen siehts mittlerweile ja so aus , das auch Klassiker auf DVD rauskommen.
Ghostbusters usw.
So, ich habe das Thema nicht vergessen und mich immer wieder bei Ebay mal umgeschaut.
Dort fand ich dann durch Zufall ein Gerät, was sowohl trocken als auch Nass VHS-Bänder reinigen soll. Da das Gerät nicht so teuer war (per Sofortkauf für 5,99 ) habe ich mal zugeschlagen.
Gestern kam das Gerät an und ich beschloss doch gleich mal, eine Kassette reinigen zu lassen. Zum Glück war dort auch ein Kabeladapter für Strom dabei, so das ich nicht per Batterie damit arbeiten mußte.
Laut Anleitung (alles nur in Englisch; das Gerät kommt wohl aus den USA) sollte man nur bei sehr stark verschmutzen Bändern die Naßreinigung durchführen. Zum Glück war auch eine Reinigungsflüssigkeit dabei, ebenso wie Ersatzreinigungsrollen.
Naja, ich dann die Erste Kassette rein und mal durchlaufen lassen. Was mir als erstes auffiel, war, das man erst mühselig die Reinigungsrollen immer umstecken muß, je nachdem ob man vor- oder zurückspult. Außerdem war der Motor wohl so schwach ausgelegt, das ich das Band öfter starten mußte, damit er es überhaupt durchzog. Zurerst fängt er sehr schnell an durchzuziehen, dann jedoch, nach ein paar Sekunden wird er immer langsamer. Gegen Ende es Bandes (egal, welche Richtung) hört er öfters auf, und mit Stopp und Start kann man es wieder zum Laufen bewegen.
Nachdem ich meine erste Kassette dann damit habe durchreinigen lassen, fiel mir auf, das zwar das Band selber wohl sauber wäre, aber er den Schimmel, der auf den Bandrändern saß, so ziemlich im Gehäuse verteilt hatte. Nicht gerade besonders vertrauenerweckend...
Ich glaube, ich werde wohl doch noch mal meine Bänder "backen", damit der Schimmel dann doch keine Chance mehr hat. Und anschließend mit diesem Gerät reinigen.
Bisher habe ich mich noch nicht getraut, das Band in den Recorder einzulegen. Nach dem Backen vielleicht...
Ach ja, das beste zum Schluß: Wer mal nach dem Gerät selber googelt, findet u.a. auch diese Seite. Da kann man dann den Preis dafür sehen: 139 $...
Anbei mal ein paar Bilder davon...
Perry
Dort fand ich dann durch Zufall ein Gerät, was sowohl trocken als auch Nass VHS-Bänder reinigen soll. Da das Gerät nicht so teuer war (per Sofortkauf für 5,99 ) habe ich mal zugeschlagen.
Gestern kam das Gerät an und ich beschloss doch gleich mal, eine Kassette reinigen zu lassen. Zum Glück war dort auch ein Kabeladapter für Strom dabei, so das ich nicht per Batterie damit arbeiten mußte.
Laut Anleitung (alles nur in Englisch; das Gerät kommt wohl aus den USA) sollte man nur bei sehr stark verschmutzen Bändern die Naßreinigung durchführen. Zum Glück war auch eine Reinigungsflüssigkeit dabei, ebenso wie Ersatzreinigungsrollen.
Naja, ich dann die Erste Kassette rein und mal durchlaufen lassen. Was mir als erstes auffiel, war, das man erst mühselig die Reinigungsrollen immer umstecken muß, je nachdem ob man vor- oder zurückspult. Außerdem war der Motor wohl so schwach ausgelegt, das ich das Band öfter starten mußte, damit er es überhaupt durchzog. Zurerst fängt er sehr schnell an durchzuziehen, dann jedoch, nach ein paar Sekunden wird er immer langsamer. Gegen Ende es Bandes (egal, welche Richtung) hört er öfters auf, und mit Stopp und Start kann man es wieder zum Laufen bewegen.
Nachdem ich meine erste Kassette dann damit habe durchreinigen lassen, fiel mir auf, das zwar das Band selber wohl sauber wäre, aber er den Schimmel, der auf den Bandrändern saß, so ziemlich im Gehäuse verteilt hatte. Nicht gerade besonders vertrauenerweckend...
Ich glaube, ich werde wohl doch noch mal meine Bänder "backen", damit der Schimmel dann doch keine Chance mehr hat. Und anschließend mit diesem Gerät reinigen.
Bisher habe ich mich noch nicht getraut, das Band in den Recorder einzulegen. Nach dem Backen vielleicht...
Ach ja, das beste zum Schluß: Wer mal nach dem Gerät selber googelt, findet u.a. auch diese Seite. Da kann man dann den Preis dafür sehen: 139 $...
Anbei mal ein paar Bilder davon...
Perry
Ich habe nochmal gegooglet und einen (englischsprachigen) Bericht über verschimmelte Bänder und deren Behandlung gefunden:
Ich hoffe, das dies auch allen anderen mal hilft, falls diese mal in die gleiche Situation kommen.
Perry
Moldy, Moldy, Moldy!
Another reader, Charlie Mayer at Swarthmore College, wrote asking what to do with archival tape that is growing yellow, green and white mold. Apparently this mold is not of the school colors. Ampex's Tom Neuman provided a ready recipe for restoration:
Open all affected boxes and remove the reels.
Place the opened boxes and tapes in a dry, warm room so that the tapes can thoroughly dry. This may take anywhere from a few days to a couple of weeks.DO NOT bake tapes that have mold growth, as this will just bake the mold into the tape, and permanently stain the surface of the tape!
After the tapes are thoroughly dry remove the flanges, if the tapes are on metal reels, and thoroughly clean the mold off with a 3% solution of Hydrogen Peroxide. This can be purchased at any drug store. Hydrogen Peroxide will effectively clean off the mold and its antiseptic properties will help to inhibit future mold growth (It also comes in handy if you cut yourself while removing the flanges). It is especially important to thoroughly clean any stick-on labels that may be on the flanges as they seem to be great breeding grounds for mold.
Next comes the awful part; load the reel of tape on a transport (after replacing the flanges) and slowly wind the tape forward by hand and inspect the surface for sign of mold. If any mold is seen it can be wiped off with the 3% Hydrogen peroxide solution and a TexWipe or similar lint-free cloth. Follow by wiping the excess liquid off with a dry wipe. Pay particular attention to the edges of the tape as this is where mold growth generally starts. The time this step will take varies greatly dependent on the severity of the mold growth and your patience.
If the entire tape is affected you can use a slightly damp (with Hydrogen Peroxide) cloth held up against both sides of the tape and run the tape through at the slowest speed you have available. If you use this method, make sure that you repeat the process several times with a dry wipe to completely dry off the tape's surface before putting the tape back in storage.
Hydrogen Peroxide is the only material we can recommend for cleaning the surface or backcoat of a tape. It does not damage any of the tape's chemical components and is safe to the user. DO NOT use alcohol or other types of cleaning solvents as they may permanently damage the tape! In many cases the surface of the tape may be stained from the mold even after cleaning. This has not proved to be a functional problem, just a cosmetic one.
Finally, thoroughly clean the storage box with Hydrogen Peroxide and dry thoroughly. Quite often the box is thoroughly damaged, and a new box may be needed. In the case of historical material the original box may need to be cleaned and stored separately from the tape. Mold growth usually initiates from moisture trapped in the box material or inside the box.
Before putting your tapes back into long-term storage make sure there is no trapped-in moisture inside the box. It is not a good idea to put tapes away when the humidity and temperature are high, as this is the air that will be trapped inside the box for the next 20 years.
Neuman says he has personally cleaned dozens of tapes using this method and it seems to work quite well.
We wish clean, dry, securely bindered tape to you all.
Author's note: Since these articles were published in 1995, the tape industry has changed dramatically; 3M no longer manufactures recording media, and the division of Ampex that made recording tape has been spun off, and is now known as Quantegy.
QuelleAnother reader, Charlie Mayer at Swarthmore College, wrote asking what to do with archival tape that is growing yellow, green and white mold. Apparently this mold is not of the school colors. Ampex's Tom Neuman provided a ready recipe for restoration:
Open all affected boxes and remove the reels.
Place the opened boxes and tapes in a dry, warm room so that the tapes can thoroughly dry. This may take anywhere from a few days to a couple of weeks.DO NOT bake tapes that have mold growth, as this will just bake the mold into the tape, and permanently stain the surface of the tape!
After the tapes are thoroughly dry remove the flanges, if the tapes are on metal reels, and thoroughly clean the mold off with a 3% solution of Hydrogen Peroxide. This can be purchased at any drug store. Hydrogen Peroxide will effectively clean off the mold and its antiseptic properties will help to inhibit future mold growth (It also comes in handy if you cut yourself while removing the flanges). It is especially important to thoroughly clean any stick-on labels that may be on the flanges as they seem to be great breeding grounds for mold.
Next comes the awful part; load the reel of tape on a transport (after replacing the flanges) and slowly wind the tape forward by hand and inspect the surface for sign of mold. If any mold is seen it can be wiped off with the 3% Hydrogen peroxide solution and a TexWipe or similar lint-free cloth. Follow by wiping the excess liquid off with a dry wipe. Pay particular attention to the edges of the tape as this is where mold growth generally starts. The time this step will take varies greatly dependent on the severity of the mold growth and your patience.
If the entire tape is affected you can use a slightly damp (with Hydrogen Peroxide) cloth held up against both sides of the tape and run the tape through at the slowest speed you have available. If you use this method, make sure that you repeat the process several times with a dry wipe to completely dry off the tape's surface before putting the tape back in storage.
Hydrogen Peroxide is the only material we can recommend for cleaning the surface or backcoat of a tape. It does not damage any of the tape's chemical components and is safe to the user. DO NOT use alcohol or other types of cleaning solvents as they may permanently damage the tape! In many cases the surface of the tape may be stained from the mold even after cleaning. This has not proved to be a functional problem, just a cosmetic one.
Finally, thoroughly clean the storage box with Hydrogen Peroxide and dry thoroughly. Quite often the box is thoroughly damaged, and a new box may be needed. In the case of historical material the original box may need to be cleaned and stored separately from the tape. Mold growth usually initiates from moisture trapped in the box material or inside the box.
Before putting your tapes back into long-term storage make sure there is no trapped-in moisture inside the box. It is not a good idea to put tapes away when the humidity and temperature are high, as this is the air that will be trapped inside the box for the next 20 years.
Neuman says he has personally cleaned dozens of tapes using this method and it seems to work quite well.
We wish clean, dry, securely bindered tape to you all.
Author's note: Since these articles were published in 1995, the tape industry has changed dramatically; 3M no longer manufactures recording media, and the division of Ampex that made recording tape has been spun off, and is now known as Quantegy.
Ich hoffe, das dies auch allen anderen mal hilft, falls diese mal in die gleiche Situation kommen.
Perry
Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)
Forumregeln |
Alle Zeitangaben in WEZ +2. Es ist jetzt 06:49:12 Uhr.